iControl Case Studies
Case Studies Considering Only Cycle Time Reduction
Study #1
120,000 Part production run / 1 cavity = 120,000 IMM cycles
120,000 cycles * cycle time saving 6.6 seconds = 220 hours
220 IMM hours available for other jobs
Average IMM operation cost = $100
Average IMM operator cost / hour = $40
220 Hours saved * $140 / hour = $30,800 savings
Plus possible emissions savings depending on power generation typeNote: Case study results of iControl installed on a 2 drop hot runner system, processing glass reinforced polypropylene (PP) part (automotive tail lamp housing)
Case Study #2
106,000 Part production run / 1 cavity = 106,000 IMM cycles
106,000 cycles * cycle time saving 5 seconds = 147 hours
147 IMM hours available for other jobs
Average IMM operation cost = $100
Average IMM operator cost / hour = $40
147 Hours saved * $140 / hour = $20,580 savings
Plus possible emissions savings depending on power generation type
Note: Case study results of iControl installed on a 2 drop hot runner system, processing talc filled polypropylene (PP) part (automotive air box)
